Список литературы

2687-0940

Challenges in modern medicine

2687-0940

10.18413/2687-0940-2020-43-2-304-312

STOMATOLOGY

<strong>ACHIEVEMENTS AND PROSPECTS FOR MANUFACTURE OF DENTISTS<br /> ON CAD / CAM IMPLANTS FOR PATIENTS WITH PARTIAL ADDITION (REVIEW OF LITERATURE)</strong>

Efimin

A. V.

Efimin

A. V.

a-efimin@yandex.ru

Barkovec

K. N.

Barkovec

K. N.

2020

43200

The development of medical science in general, and in particular dentistry, today is characterized by a process of mutual integration with technical innovations in order to improve the accuracy, efficiency of the treatment and diagnostic process, as well as optimizing the functioning of the healthcare system. The article contains a review of publications on the current state and prospects of manufacturing dentures on CAD/CAM implants for patients with partial adentia. In the process of the analytical review it was established that today the computer-aided design (CAD) system is actively used in various fields of economic activity. Many prostheses are made using CAD/CAM systems using various types of materials such as porcelain, composite resin and metal blocks. Even materials such as zirconia, which could not be manufactured by conventional methods previously due to technical limitations, can now be made by these systems. In addition, new materials are constantly being developed to improve the working platform through a combination of CAD/CAM technology, high-strength ceramics and modern composite cements, hydrofluoric acid, sand blasting. The available data provide promising results for CAD/CAM-based implant restorations.

partial adentiadental prostheticsCAD/CAMcomputer-aided design systemproduction automation system

Список литературы

Akulin A.V., Babaeva A.A. 2019. Komp'yuternye tekhnologii v stomatologii [Computer technology in dentistry]. V sbornike: ROST – Razvitie, Obrazovanie, Strategii, Tekhnologii. Sbornik ma-terialov II Vserossiiskoi nauchno-prakticheskoi konferentsii. S. 3–9.

Alieva S.P. 2019. Komp'yuternoe modelirovanie pri implantatsii: analiz otechestvennogo i zarubezhnogo opyta [Computer modeling during implantation: analysis of domestic and foreign experience]. International Journal of Medicine and Psychology. 2. (4): 83–90.

Apresyan S.V. 2019. Tsifrovoe planirovanie ortopedicheskogo stomatologicheskogo lech-eniya [Digital plan orthopedic dental treatment]. Rossiiskii stomatologicheskii zhurnal. 23 (3–4): 158–164.

Gorelova V.A., Orekhov S.N., Matveev S.V. 2016. CAD/CAM – tekhnologiya v ortopedicheskoi stomatologii [CAD/CAM technology in prosthetic dentistry]. Mezhdunarodnyi studench-eskii nauchnyi vestnik. 4–3: 246–248.

Ivannikova A.S., Meshkov V.A., Urzhumov R.L. 2018. Sovremennaya tekhnologiya CAD/CAM v stomatologii [Urzhumov Modern CAD/CAM technology in dentistry]. V knige: Nauchno-issledovatel'skaya rabota studentov stomatologicheskogo fakul'teta. Materialy II nauchno-prakticheskoi konferentsii studentov stomatologicheskogo fakul'teta v ramkakh distsipliny «Praktika. NIR». Chi-tinskaya gosudarstvennaya meditsinskaya akademiya. S. 21–23.

Karapetyan T.A., Perunov A.Yu. 2018. Tekhnologiya CAD/CAM – ortopedicheskaya sto-matologiya budushchego [Technology of CAD/CAM prosthetic dentistry of the future]. Byulleten' med-itsinskikh internet-konferentsii. 8 (2): 63–64.

Matko S. 2015. Opredelenie naibolee optimal'nogo metoda zaklyuchitel'nogo etapa ortopedicheskogo lecheniya patsientov s pomoshch'yu restavratsii izgotovlennykh po CAD/CAM tekhnologii sistemoi Chairside [Determination of the optimal method of the final stage of orthopedic treatment of patients with restorations made by CAD/CAM technology the Chairside system]. Stoma-tologiya. 6: 64–63.

Naumovich S.S., Razorenov A.N. 2016. SAD/CAM sistemy v stomatologii: sovremennoe sostoyanie i perspektivy razvitiya [CAD/CAM systems in dentistry: current state and prospects of development]. Sovremennaya stomatologiya. 4 (65): 2–9.

Razumenko G.P. 2016. Znachenie i mesto CAD/CAM tekhnologii dlya otechestvennoi ortopedicheskoi stomatologii [the Importance and place CAD/CAM technologies for domestic prosthetic dentistry]. Aktual'nye problem gumanitarnykh i estestvennykh nauk. 8 (2): 169–173.

Sunarchin E.I., Samukova E.A., Babaeva A.A. 2018. Ispol'zovanie 3D-tekhnologii i CAD/CAM v stomatologii [The Use of 3D technology and CAD/CAM in dentistry]. Sovremennye nauchnye issledovaniya i razrabotki. 3 (20): 845–847.

Khanakhmedov V.A. 2018. Unikal'naya tekhnologiya CAD/CAM sistem v ortopedicheskoi stomatologii dlya izgotovleniya karkasov nes"emnykh zubnykh protezov. Analiz razlichnykh CAD/CAM system [the Unique technology of CAD/CAM systems in prosthetic dentistry for the fabrication of frameworks of fixed dental prostheses, the analysis of different CAD/CAM systems]. Byulleten' med-itsinskikh internet-konferentsii. 8 (2): 46–47.

Ahlholm P., Sipilä K., Vallittu P., Jakonen M., Kotiranta U. 2018. Digital and conventional impressions in fixed prosthetics: anoverview. J. Prosthodont. January; 27 (1): 35–41. DOI: 10.1111 / jopr.12527.

Algazali T.F. 2016. Advances in CAD/CAM technology: options for practical implementa-tion. Journal of Prostodontic research. 60 (2): 72–84.

Al-Merikhi X., Yilmaz B., McGlumphy E., Brantley, Washington; Johnston W.M. 2018. Distortion of dental prosthesis frames made of titanium and zirconium dioxide made from CAD/CAM implants. J. Prosthesis. Dent., 119: 116–123.

Arberg D., Lauer H.K., Arberg M., Weigl P. 2016. Evaluating the suitability and effective-ness of fully ceramic restorations from CAD/CAM based on direct and indirect digitization: a double-blind randomized clinical trial. Clin. Oral. Investig. 20 (2): 291–300.

Azarbal A., Azarbal M., Engelmayer R.L., Kunkel T.S. 2018. Comparison of the maximum fit of CAD/CAM crowns milled from two different materials. Journal of prosthetics. 27 (5): 421–428.

Batson E.R., Cooper L.F., Ducum I., Mendonca. 2014. Clinical results of three different crown systems with CAD/CAM technology. J. Prosthet. Dent. 112: 770–777.

Boutros S. 2017. CAD/CAM technologies help to create ideal orthopedic structures with support for implants. Dental prosthetics. 1: 19–23.

Carneiro P., Bezerra de Medeiros, de Souza Santos, Oliveira de Almeida. Precision of CAD/CAM systems for manufacturing removable partial denture frames: a systematic review. J. Prosthet-ic. Dent. 2020, March 5. pii: S0022–3913 (20) 30018–4. DOI: 10.1016 / j. prosdent.2020.01.003.

Cathedial M.T., Goodacre C.J., Baba N.Z. 2013. CAD/CAM complete dentures: a review of two commercial systems of production. J. Calif. Dent. Assoc.; 41: 407–16.

Davidowitz G., Kotick P.G. 2011. The use of CAD/CAM in dentistry. Dental. Clinic. N. Am. 55: 559–70.

De Franca D.G., Morais M.H., Das Neves F.D., Barbosa G.A. 2015. The impact of CAD/CAM on the accuracy of fitting implants made of zirconium and cobalt-chrome fixed dentures. J. Prosthet. Dent. 113: 22–28.

Faeghinejad M., Proussaefs P., Al Helal A., Lozada J. 2019. Composite prosthesis CAD/CAM: a digital process for manufacturing a cement-held prosthesis made of zirconium dioxide on top of milled titanium rods with screw fixation. Int. J. Periodontics Restorative Dent. 39: 39–47.

Fasbinder D.J., Neiva G.F. 2016. Surface evaluation of polishing techniques for new resilient CAD/CAM restorative materials. Journal of Esthetic and Restorative Dentistry. 28(1): 56–66.

Goodacre B.J., Goodacre C.J., Baba N.Z., Kattadiyil M.T. 2016. Comparison of adaptation of the denture base between CAD/CAM and traditional manufacturing methods. J. Denture dent. 116 (2): 249–256. DOI: 10.1016 / j. prosdent.2016.02.017.

Homaei E., Farhangdoost K., Tsoi J.K.H., Matinlinna J.P., Pow E.H.N. 2016. Static and fa-tigue mechanical behavior of three dental CAD/CAM ceramics. J. Mech. Behav. Biomed. Mater. 7: 304–313.

Infante L., Yilmaz B., McGlumphy E. 2014. Manufacturing of complete removable prosthe-ses with CAD/CAM technology. J. Prosthet. Dentistry; 111: 351–5.

Joda T., Ferrari M., Braegger U. 2016. Digital approach for one-step formation of the su-praimplant appearance profile with an individualized CAD/CAM healing abutment. J. Prosthodont. Resi-dence; 60: 220–223.

Käsemodel R.B., de Souza A.F., Voigt R. 2020. The CAD/CAM interface algorithm reduces cutting force, roughness, and processing time when milling in free form. Int. J. Adv. Manuf. Technol. https://doi.org/10.1007/s00170-020-05143-x.

Lebon N., Tapie L., Duret F., Attal J.P. 2016. Understanding Dental CAD/CAM for Restora-tions-Dental Milling Machines from a Mechanical Engineering Viewpoint. Part B: Labside Milling Ma-chines. International Journal of Computerized Dentistry. 19(2): 115–134.

Negm E.E., Aboutaleb F.A., Alam-Eldein A.M. 2019. Virtual assessment of fit and accuracy in removable frames of a partial upper jaw prosthesis made of poly (etherephyrketone), made using direct and indirect CAD/CAM techniques. J. Prosthodont. 28 (7): 804–810. doi: 10.1111 / jopr.13075. Epub 2019 June 11.

Papadiochou S., Pissiotis A.L. 2018. Marginal adaptation and CAD/CAM technology: a sys-tematic review of restorative materials and manufacturing technologies. Prosthetic dent. 119 (4):545–551. doi: 10.1016/j. prosdent.2017.07.001.

Petersen P.E., Yamamoto T. 2005. Improving the oral health of older people: the approach of the who Global oral hygiene program. Community Dent. Oral. Epidemiol. 33: 81–92.

Saponaro P.S., Yilmaz B., Heshmati R.H., Mcglumfi E.A. 2016. Clinical characteristics of complete dentures made from CAD/CAM: a cross-sectional study. J. Prosthetic. Dent. 116: 431–435.

Vech B., GOOS-Kovacs G., Borbély J., Herman P. 2017. Comparing the accuracy of direct and indirect three-dimensional digitization processes for CAD/CAM systems-an in vitro study. Journal of orthopedic research. 61 (2): 177–184.